近期有很多客户来电反应电加热器应该怎样安装最合理,河北九正通明除尘今天安排我们的技术员小杜来为大家讲解一下。 Recently there are many customers call response and how to install the electric heater should be reasonable, Hebei Jiuzheng dust lit our technicians today arrange Komori to explain.
电加热器的安装距离要适当,距离太远影响电加热器的电流。距离太近,电加热器间可能会产生屏弊现象,造成电加热器表面电场强度减弱。集尘极的上下部都是固定的,并且集尘极都是接地。一般要求粉尘易于沉降在极板上,在振打的时后所产生的二次扬尘少,同时还要求极板较为轻便,又要有一定的刚度,振打时粉尘易于沉落又不会发生变形。
The installation distance of the electric heater is appropriate, and the distance is too far to affect the electric current of the electric heater. When the distance is too close, the electric heater may produce the disadvantage of the screen, which causes the electric field strength of the electric heater to be weakened. The upper and lower parts of the dust collector are fixed, and the dust collecting poles are all grounded. General requirements for dust easy to settle on the plates, resulting in vibration and beating after two times lessdust, also called plate and more lightweight, high stiffness, vibration when the dust is easy to sink and no deformation.
电加热器极放电能力的好坏与电加热器极放电端的尖度(既曲率)有关,当电加热器极放电尖角有粉尘聚集时其曲率就较小,这样对它放电的效果有很大的影响。
The discharge capacity of electric heater is related to the tip (tip curvature) of electric heater. When the discharge angle of electric heater is gathered with dust, its curvature is smaller, which has great influence on its discharge effect.
电加热器极的型式有很多种,放电尖角越多则电加热器的效果也就越好,但是放电尖角越多,制作及安装较为困难。电加热器一般都接有高压电,需要有良好的绝缘装置。
There are many kinds of electric heater poles. The more the discharge angle is, the better the electric heater will be. However, the more the discharge angle is, the more difficult it is to make and install. Electric heaters usually have high voltage and need good insulation. |
09:00 ~ 23:00
客服邮箱